SGM-SV Magnetic Gripper

The SGM-SV handling set is ideal for handling ferromagnetic components. Wherever perforated sheets, complex laser-cut components, sheets with holes and cutouts have to be gripped, the SGM-SV shows its strengths. The magnetic gripper with a holding force of 100 N is supported by a gripping surface with friction ring that absorbs high lateral forces. The handling set is suitable for human-robot collaboration. The bistable function of the permanent magnet ensures safe gripping even in the event of a power failure.

Fabricante:Schmalz

Sitio web

Solicitar información Añadir a Mis Soluciones

Descripción general Especificaciones Características Compatibilidad

Descripción general

Screw the housing to your robot flange. Connect the compressed air and power supply. The gripper can be parameterized quickly and easily via the commissioning software. A distinction is made between the switching states ""gripping"" and ""depositing"".

Productos relacionados

Schmalz

ECBPi CobotPump

The Robot Set ECBPi is ideal for handling both airtight and slightly porous workpieces, especially in the field of logistics and packaging.The electrical vacuum generator ECBPi is an intelligent and simple solution for vacuum generation independent of compressed air. The set contains all the components required to set up a complete gripper and thus enables simple assembly and commissioning. Thanks to the URCap, the gripper can be perfectly adapted to fulfill your individual needs.

Schmalz

VEE UR Starter Set

The VEE robot set based on a pneumatic vacuum generator is ideal for use in primary and secondary packaging processes and in pick place applications. The set contains all the components required to build a complete gripper, making it easy to assemble and commission.

Schmalz

FXCB Robot Set

The FXCB robot set is ideal for handling workpieces in the field of intralogistics using pneumatic vacuum generation.The set contains all the components required to assemble a complete gripper, thus enabling easy assembly and commissioning. The sealing element of the gripper consists of either a sealing foam or suction cups. Suction cups are perfect for use when handling uneven workpieces.Thanks to the URCap, the gripper can be perfectly adapted to your individual needs.

Schmalz

ECBPMi CobotPump

The ECBPMi is the smallest electrical vacuum gripper for cobots on the market with intgrated RS485 and IO-Link interface. With a single suction cup and a matching diameter to the joint it is perfectly suited for the UR3.It is ideal for the handling of airtight workpieces in electronics or packaging sectors.The set contains all the components required to set up a complete gripper and thus enables simple assembly and commissioning.Thanks to the URCap, the gripper can be perfectly adapted to fulfill your individual needs.

Schmalz

Vision & Handling-Set 3D-R

The Vision Handling Set 3D-R is a complete solution for the complex task of automated bin picking. It is a gripping system specially developed for bin picking, including a 3D camera system and the suitable software. Integrated software modules enable both BoxPick and ItemPick. Thanks to the URCap, the gripper can be perfectly adapted to your individual needs.

Schmalz

SLG Lightweight Gripping System

The lightweight gripper SLG is an individually configurable and additive manufactured lightweight gripper for use in the packaging and logistics sector. Due to the additive manufacturing it is particularly light and impresses with a minimum of interfering contours. The configurator enables a simple and quick design of the gripper to match your work piece.Thanks to the URCap, the gripper can be perfectly adapted to your individual requirements.

Schmalz

FQE Vacuum Area Gripping

The FQE is a flexible area gripper for handling products regardless of size and geometry. The gripper enables the handling of products from different pick-up positions. Thanks to its modular design and size variance, the gripper can be specially adapted to a wide range of workpiece and process characteristics. For example, a choice can be made between sealing elements made of foam or plug-in suction cups. The alternatives with internal or external vacuum generation offer further starting points for individualization. With the energy-efficient internal vacuum generation, the operating costs of the overall system can be reduced. The optionally integrated control valves reduce cycle times and interference contours.

Schmalz

RECB Lightweight

The robot set RECB is ideally suited for handling suction-tight or porous and uneven workpieces. Thanks to the optimized design of the vacuum suction cup, the handling set is designed for use in palletizing and depalletizing processes with flexible workpieces, such as filled cardboard boxes. The powerful vacuum generation enables low cycle and evacuation times as well as a high level of leakage compensation. The set contains all components required to build a complete gripper and thus enables easy assembly and commissioning. Thanks to the URCap, the gripper can be perfectly adapted to your individual requirements.

Schmalz

Bin-Picker SBPG

The SBPG is a ready-to-connect vacuum gripper for the automated removal of parts from containers with a chaotic or pre-sorted packing pattern. Thanks to the special bin-picking suction cup SVE, optimum sealing and holding force is achieved, even when gripping freely formed parts or at the workpiece corners and edges. The special suitability for the packaging and logistics sector is reinforced by the low net weight and compact dimensions of the gripper. Variations with integrated or external vacuum generation are available. Since the air supply is fully integrated in both variants, interfering contours caused by vacuum hoses are avoided. Optionally, the integrated swivel module offers additional speed advantages for the automated handling process.

Schmalz

Robot Set SCG-HSS

The SCG-HSS flow gripper is designed for gentle handling of highly structured, dimensionally stable workpieces with a height difference of up to 25 mm. The gripper consists of two core elements: the integrated vacuum generator and the flexibly adjustable gripping surface. This is realized by a pin curtain that gently adapts to the surface structure of the workpiece and is pneumatically fixed in position. This adaptation to individual workpiece contours eliminates the need for costly set-up times. Thus, handling of workpieces in batch size 1 can be realized with low operating costs. Thanks to the ESD-compliant design, there is protection against uncontrolled electrostatic discharge. This makes the gripper suitable for use in PCB handling as well as for unloading injection molding machines and for packaging processes.

Schmalz

SGM-SV Magnetic Gripper

Schmalz

MATCH End-of-Arm Tool Changer

The End-of-Arm Ecosystem MATCH is a multifunctional platform for applications in the areas of PickPlace, mobile robotics, order picking, the pharmaceutical industry as well as in the packaging industry. Standardized interfaces allow switching between different vacuum grippers and mechanical grippers - automated in a storage station or manually by an ergonomic one-hand click system.

Schmalz

Lightweight Layer Grippers ZLW

The ZLW lightweight layer gripper is ideal for automated end-of-line (EOL) palletizing processes. Its lightweight design makes it particularly efficient and versatile. With a possible load capacity of up to 35 kg and maximum dimensions of 850 x 650 mm, a wide range of workpieces can be handled, including parcels, packages, pouches, jars, cans and buckets. Whether for pick-and-place in the production process or for feeding layers of workpieces into production, the lightweight layer gripper ZLW offers a reliable solution. The use of sealing elements such as sealing foam or suction cups ensures safe handling. Would you like to make your production processes more efficient while maximizing the versatility of your robots? Choose the ZLW lightweight layer gripper.

Schmalz

Sack-Gripper PSSG

The sack gripper PSSG enables the automated handling of sacks. It is versatile and can be used for paper, plastic and woven sacks, including porous or low-fill bags. The gripper ensures reliable handling of a wide range of materials and geometries thanks to an innovative, durable sealing element made of FDA-compliant silicone. Its modular design results in a low gripper weight and enables easy maintenance. Direct access to device data via smartphone is possible via an NFC interface. Options such as rigid connection or height compensation are available. Vacuum generation is integrated via the energy-saving SEP lard ejector modules. The sack gripper is available with integrated vacuum generation (PSSG-X) or with external vacuum generation (PSSG-M). It fits to Universal Robot´s UR10e as well as to UR20 and UR30 depending on the sack payload.